OXFORD COMPUTER TECH LIMITED: ALL ELECTRICAL AND ELECTRONICS AND TELECOMMUNICATION DEVICES, SALES, SERVICES, AND INSTALLATIONS +255655948888

OXFORD COMPUTER TECH LIMITED: ALL ELECTRICAL AND ELECTRONICS AND TELECOMMUNICATION DEVICES, SALES, SERVICES, AND INSTALLATIONS +255655948888

Thursday, April 19, 2012

canon manual

Canon 10, 24, 115, 14, NP112, PC3
error problem
E0Heat lamp
E2Scanner

Canon 210, 300
Код ошибкиproblem
E0Heat problem
E1Sorter
E2Scanner
E4Drum drive
E5Lens drive
E6Exposure lamp
E7Mirror sensors

Canon 25, 250, 270, 350
Код ошибкиproblem
E0Thermistor/thermoswitch or heat lamps
E1Sorter
E2Scanner home
E3Scanner return
E4Right front door/main motor
E5Lens home
E6Lamp regulator
E8Counter wire

Canon 400, 500
Код ошибкиОписание
E0Fuser
E1Sorter
E2Scan home
E3Scan
E4Clock pulse or open RF door
E5Lens position
E6Exposure lamp, fuse 2
E8Counter

Canon 5L, 5ll, 5Lll, 3ll, 2L, PC-1, PC-2, PC-5
Код ошибкиproblem
E0Heater problem
E1The heater film has gone off center. Turn machine off & on, make sure it's level etc.
E2Scan problme
E6Exposure lamp or exposure lamp sensor

Canon NP1215
Код ошибкиproblem
E000Low temperature, thermoswitch, thermistor or AC driver
E001High temperature, thermistor, AC driver
E030Counter
E202Scan not returning home. Scan not leaving home
E221Lamp regulator board
E400Document feeder problem
E500Sorter problem

Canon 150
Код ошибкиproblem
E0Thermistor, thermal switch, heat
E1Sorter, scanner home
E2Motor, clock pulse
E3Scan problem
E4Lens home
E5Lamp regulator/document sensor
E6Motor control
E7Total counter
E8Lamp regulator
E9Copyboard drive motor/board
EDMotor control PCB
EEDC controller on motor
E001High fuser temperature. Shorter fuser thermistor
E030Total counter disconnected or open
E202Scan problem
E210Lens problem
E221DC power supply, lamp regulator board or main board
E400Document feeder board problem
E500Sorter board problem
E000Low fuser temperature

Canon 1500
Код ошибкиproblem
E001High fuser temperature. Shorter fuser thermistor
E030Total counter disconnected or open
E202Scan problem
E210Lens problem
E221DC power supply, lamp regulator board or main board
E400Document feeder board problem
E500Sorter board problem
E000Low fuser temperature

Canon 155
Код ошибкиОписание
E0Thermistor, thermal switch, heat
E1Sorter, scanner home
E2Motor, clock pulse
E3Scan problem
E4Lens home
E5Lamp regulator/document density sensor
E6Motor control board
E7Total counter
E8Lamp regulator
E9Copyboard drive motor/board
EDMotor control PCB
EEDC controller on motor

Canon 20
Код ошибкиproblem
E2Scanner
E0Heat lamp
D030Total counter or DC controller
E00Heater (Press SW301 twice to reset)
E001Over temperature
E010Drum drive clock pulse
E202Scan home position
E204Registration switch (scan problem)
E210Lens home
E221Lamp regulator or DC controller
E400Document feed problem (Check circuit breaker)
E500Sorter (Check circuit breaker)
E000Fuser problem. Low temperature. Lamp, thermal switch, AC driver
E001Fuser problem. High temperature. Triac, AC driver, pinched wire
E004Fuser problem
E053Sorter
E030Counter
E202Scan
E210Lens
E221Exposure lamp regulator board, thermal fuse, exposure lamp
E400ADF
E500Sorter
E710DC controller (main board)
E001Heater problem

Canon 2015
Код ошибкиproblem
D030Total counter or DC controller
E00Heater (Press SW301 twice to reset)
E001Over temperature
E010Drum drive clock pulse
E202Scan home position
E204Registration switch (scan problem)
E210Lens home
E221Lamp regulator or DC controller
E400Document feed problem (Check circuit breaker)
E500Sorter (Check circuit breaker)

Canon 2020, 2120
Код ошибкиproblem
E000Fuser problem. Low temperature. Lamp, thermal switch, AC driver
E001Fuser problem. High temperature. Triac, AC driver, pinched wire
E004Fuser problem
E0053Sorter
E030Counter
E202Scan
E210Lens
E221Exposure lamp regulator board, thermal fuse, exposure lamp
E400ADF
E500Sorter
E710DC controller (main board)

Canon 3025
Код ошибкиproblem
E000Fuser problem
E010Main motor, motor board, clock pulse
E030Counter
E050Duplex side to side problem
E051Crossway registration
E200Scan problem
E200Scan reverse sensor or scan
E202Scan return problem
E204Document sensor, scan reverse sensor or scale
E210Lens problem
E220Lens
E220Blank lamp open or lens home problem
E240DC controller
E400Document feeder board problem or document feeder interface problem
E500Sorter
E620Editing problem

Canon 3030, 3050
Код ошибкиproblem
E000Fuser temp low. Heat lamp, thermoswitch, thermistor, SSR
E001Fuser temperature too high or shorted thermistor
E002Fuser temperature too low
E003Fuser temperature too low
E004SSR, or lamp reg. board
E010Drive problem
E022DV unit switching problem
E030Counter not working/open
E202Scan problem. Scan sensor, scan motor
E204Scan problem. Scan sensor, scan motor
E210Lens problem. Lens sensor, lens motor
E220Exposure lamp
E240DC controller (main board)
E400RDF circuit board
E401RDF pickup motor drive
E402RDF belt motor drive
E403RDF feed drive problem
E404RDF exit motor
E411RDF sensor problem
E500Sorter board problem
E510Sorter feed motor
E512Sorter delivery motor
E514Sorter delivery motor
E520Sort stack motor
E530Vibrator motor
E531Stapler motor
E535Vibrator motor
E540Shift problem
E541Shift problem
E710DC controller
E711DC controller
E712DC controller. Document feeder board or cable
E800Auto shut off relay

Canon 3225
Код ошибкиproblem
E000Fuser problem
E010Drive
E030Counter
E050Duplex side to side problem
E051Duplex side to side problem
E200Scan problem
E202Scan return problem
E204Scan
E210Lens problem
E220Blank lamp open or lens home problem
E240Bad DC controller
E400Document feeder board problem or document feeder interface problem
E500Sorter
E620Editing problem

Canon 3325
Код ошибкиproblem
E000Low fuser temperature. Heat lamp, thermoswitch, thermofuse, thermistor, SSR
E001High fuser temperature. Thermistor, SSR, pinched wire
E002Low fuser temperature. Same as E002
E003Same as E000/E001
E010Same as E002
E022Motor drive problem
E030Counter
E202Scan motor, sensor
E204Scan motor, sensor
E210Lens motor, sensor
E220Exposure lamp
E240DC controller (main board)
E401Pickup drive problem (might be Doc. Feeder)
E402Document belt drive problem
E404Exit motor (document feeder)
E411Document sensor (document feeder)
E500Sorter/machine communication problem
E510Sorter drive problem
E530Sorter home sensor
E531Stapler unit swing sensor
E540Sorter cam sensor
E541Sorter cam sensor
E710DC controller (main board)
E712DC controller or document feeder board

Canon 3525, 3725
Код ошибкиproblem
E000Fuser problem
E010Main motor, motor board, clock pulse
E030Counter
E050Duplex side to side problem
E051Crossway registration
E200Scan problem
E202Scan return problem
E202Scan home sensor or home scan
E204Document sensor, scan reverse sensor or scale
E210Lens
E220Blank lamp open or lens home problem
E240DC controller
E400Document feeder board problem or document feeder interface problem
E500Sorter
E620Editing problem

Canon 3825
Код ошибкиОписание
E000Low fuser temperature. Heat lamp, thermoswitch, thermofuse, thermistor, SSR
E001High fuser temperature. Thermistor, SSR, pinched wire
E002Low fuser temperature. Same as E002
E003Same as E000/E001
E010Same as E002
E022Motor drive problem
E030Counter
E202Scan motor, sensor
E204Scan motor, sensor
E210Lens motor, sensor
E220Exposure lamp
E240DC controller (main board)
E401Pickup drive problem (might be Doc. Feeder)
E402Document belt drive problem
E404Exit motor (document feeder)
E411Document sensor (document feeder)
E500Sorter/machine communication problem
E510Sorter drive problem
E530Sorter home sensor
E531Stapler unit swing sensor
E540Sorter cam sensor
E541Sorter cam sensor
E710DC controller (main board)
E712DC controller or document feeder board

Canon 4035
Код ошибкиОписание
E000Low fuser temperature
E001High fuser temperature
E010Main motor clock pulse
E011Bind or load on main motor
E020No TF for 3 minutes
E030Copy counter
E050Duplex unit
E201Scan motor
E203Scan motor
E210Lens home
E240DC controller
E241DC controller
E320CCD
E400DC controller, 24V
E500DC controller, 24V
E510Finisher feed motor
E520Stacker motor
E530Guide plate shift motor
E531Stapler motor
E620DC controller, edit board

Canon 4050, 4080
Код ошибкиОписание
E000No fuser heat
E001High fuser temperature or shorter thermistor
E002Low temperature or bad thermistor
E003Fuser problem
E004Bad SSR (heat staying on)
E010Drive
E020Black toner motor
E030Counter
E080Interface problem with color unit
E081Vertical drive motor
E082Horizontal drive motor
E083Color unit sensor on right
E084Color unit sensor on left
E085Color unit release sensor or release or solonoid
E086Color unit claw release
E089Laser problem
E100Laser problem
E110Laser motor
E140Laser
E202Scan
E203Scan
E204Scan
E210Lens
E223Color unit filter drive motor
E240DC controller
E401RDF pickup motor
E402RDF belt motor
E403RDF feed motor
E411RDF document sensor
E500Sorter-Copier communication error
E510Sorter drive
E512Sorter drive
E513Sorter drive
E514Sorter drive
E520Top limit sensor or stack sensor
E530Sorter home sensor
E531Stapler home sensor
E535Stapler swing sensor
E540Stack shift sensor
E660IC card
E710DC controller
E711DC controller
E714DC controller
E800Power off circuit

Canon 4540
Код ошибкиОписание
E00Low fuser temperature
E001High fuser temperature
E010Main motor clock pulse
E011Bind or load on main motor
E020No TF for 3 minutes
E030Copy counter
E050Duplex unit
E201Scan motor
E203Scan motor
E210Lens home
E240DC controller
E241DC controller
E320CCD
E400DC controller, 24V
E500DC controller, 24V
E510Finisher feed motor
E520Stacker motor
E530Guide plate shift motor
E531Stapler motor
E620DC controller, edit board

Canon 4835
Код ошибкиОписание
E000Low fuser temperature
E001High fuser temperature
E002Low fuser temperature
E003Low fuser temperature
E010Drive
E030Counter
E080Color change board problems
E081Color horizontal motor problem
E082Color horizontal motor problem
E083Color problem in vertical direction
E084Color problem in vertical direction
E085Color problem in vertical direction
E086Color unit claw release problem
E089Color change incomplete
E100Laser problem
E110Laser motor problem
E140Laser unit
E203Scan drive problem
E210Lens not home or won't leave home
E240DC controller
E401Document feeder pick up motor
E402Document feeder belt motor
E403RADF feed motor
E404Document feeder motor
E411Document feeder sensor
E500Sorter to DC control interface problem
E510Stapler/sorter motor
E530Stapler swing motor
E531Stapler swing motor
E540Sorter bin motor
E541Sorter bin motor
E710DC controller
E711DC controller
E712DC controller to document feeder interface problem

Canon 6012F
Код ошибкиОписание
CNo problem. Means that the machine is correcting the fuser film tracking
CCDrum must be changed. Could be the drum serial number is identified by the logic as being non-compatible to that particular copier
E000Low fuser temperature
E001High fuser temperature
E002High fuser temperature
E003Erratic fuser temperature
E007Fuser film off track and will not repair itself
E010Main drive problem
E030Counter problem
E064Scan problem, or power supply
E202Scan problem
E210Lens drive problem or lens sensor
E220Exposure lamp stays on or off
E240DC controller (main board) or composite power supply
E261Zero cross problem. Power frequency or composite power supply
E400Communication problem between boards
E80324 volt problem
EOFuser problem
HFuser overheat

Canon 6030
Код ошибкиОписание
E000Fuser did not heat up
E001Fuser temperature too high
E002Fuser temperature not rising at correct pace
E003Fuser temperature drops
E004SSR shorted
E210Lens home problem
E212Lens home problem
E220Exposure lamp problem
E224Blank shutter home problem
E240DC controller or composite power supply problem
E400Data communication problem
E401Pickup motor problem
E402Belt motor problem
E403Feeder motor
E404Delivery motor
E411Document detect sensor
E500Communication problem with copier
E510Feeder motor
E530Home sensor
E531Staple swing sensor problem
E540Bin shift motor rotation problem
E541Bin motor
E710DC controller
E711Document feeder IC failure
E716Cassette feed IC failure
E800Auto power-off circuit problem
E901Cassette feed motor
E902Paper guide home sensor problem

Canon 6035
Код ошибкиОписание
E000Fuser did not heat up. Lamp, thermal switch, thermistors, connections, AC driver, DC controller, SSR, etc
E001Fuser temperature too high. Same possibilities as E000, as well as shorted wire
E002Fuser temperature not rising at correct pace. Same possibilities as E000
E003Fuser temperature drops. Same as E003
E004Fuser problem. AC driver, SSR bad, wire shorted
E010Drive problem. Main motor, gears, etc
E030Total counter
E064Composite power board or DC controller
E065Composite power board or DC controller
E202Scan motor or scan sensor problem. Panel locked with no Код ошибки. Scan motor problem
E203Scan problem or scan sensor
E204Scan problem or scan sensor
E210Lens sensor or motor problem
E212Lens sensor or motor problem
E220Exposure lamp or exposure lamp regulator board
E224Blanking shutter motor or sensor
E240DC controller or composite power supply problem
E244DC controller
E400RDF to copier communication problem
E401RDF Pickup motor or pick up sensor
E403RDF feed motor or pulse sensor
E404RDF delivery motion problem
E404RDF delivery motor problem
E411RDF tray sensor or registration sensor
E500Sorter main board or communication with copier
E510Sorter feed motor
E530Sorter guide bar motor
E531Sorter stapler motor
E540Sorter bin shift motor
E541Sorter bin motor
E550Sorter power supply
E710DC controller
E711DC controller
E712Document feeder IC failure
E716DC controller. Sorter
E800Auto power off function (DC controller)
E901Pedistal motor
E902Jogger side plate sensor or motor

Canon 6045
Код ошибкиОписание
E000Fuser did not heat up. Lamp, thermal switch, thermistors, connections, AC driver, DC controller, SSR, etc
E001Fuser temperature too high. Same possibilities as E000, as well as shorted wire
E002Fuser temperature not rising at correct pace, same possibilities as E000
E003Fuser temperature drops. Same as E000
E004Fuser problem: AC driver, SSR bad, wire shorted
E005Fuser cleaning web, or problem with sensor, lever or connector. Service mode 6 is the probably reset for this
E006Fuser feed connector
E010Drive problem. Main motor, gears, etc
E013Waste toner drive problem, or waste toner sensor switch has been actuated too many times
E015Pickup motor power supply. Could be bad motor or motor board, or DC controller
E020Problem with developer unit, toner hopper, hopper motor, connection, sensor or DC controller
E030Total counter
E031Option counter or total counter
E050Holding tray (duplex) home position sensor motor or board
E051Holding tray (duplex) home sensor motor or board
E202Panel locked up, but might be no Код ошибки, scan motor problem
E203Scan problem or scan sensor
E204Scan problem or scan sensor
E210Lens sensor or motor problem
E212Lens sensor or motor problem
E213Scan lock sensor or lock solenoid
E220Exposure lamp regulator board
E240DC controller or composite power supply problem
E243DC controller
E400RDF to copier communication problem
E401RDF pickup motor or pickup sensor
E402RDF belt motor or pulse sensor
E403RDF feed motor or pulse sensor
E411RDF tray sensor or registration sensor
E500Sorter main board or communication with copier
E510Sorter feed motor
E522Sorter push bar motor
E523Sorter reference wall motor
E524Sorter multi-guide motor
E525Sorter bin paper sensor automatic adjustment problem
E526Sorter bin paper sensor automatic adjustment problem
E530Sorter guide bar motor
E531Sorter stapler motor
E532Stapler motor
E533Stapler inside paper sensor
E540Sorter bin shift motor
E550Sorter power supply
E710DC controller
E711DC controller
E712Document feeder IC failure
E713DC controller, sorter
E800Auto power off circuit problem. Main switch or DC controller
E802Auto power off circuit problem. Main switch or DC controller

Canon 6085
Код ошибкиОписание
E000After power-on, the upper fixing roller does not reach 100 C within 5 min
E001The temperature of the upper fixing roller exceeds 230 C for 5 sec or more
E002After the temperature of the upper fixing roller has exceeded 100 C, it does not reach 180 C within 5 min
E003After the temperature of the upper fixing roller has reached 180 C, it drops to 100 C or less for 5 sec or more
E005The length used of the cleaning belt inside the fixing assembly has exceeded a specific value
E012After the drum motor drive signal has been generated, clock pulses are not generated within 2 sec
E013After the waste toner feeding screw has become locked, the detecting switch (SW20) is pressed a multiple number of times within a specific period of time
E014When the fixing motor (M17) is rotating, an error is detected for 2 sec or more
E015After the pick up motor drive signal has been generated, clock pulses have not been generated within 2 sec
E019As many as 50,000 have been made after detecting a waste toner full condition
E020During copying, the toner supply signal is 0', indicating the absence of toner, for 3 min or more. During toner supply sequence at time of installation, the toner supply signal does not go '1' after 6 min or more
E030After the total copy counter has turned OFF, an open circuit is detected for the total copy counter
E032After the clock pulse signal reached the IPC communication format of the copier DC controller PCB, the Copy Data Controller-A1 does not detect the signal
E050While the paper jogging guide motor (M11) drive signal is being generated, the paper guide home position signal (THP) is not generated for 2 sec or more. While the paper jogging guide motor (M11) is being generated, the paper jogging guide home position signal (THP) is generated for two sec or more
E202The scanner home position signal (SCHP) is not generated within 10 sec after the power switch or the Copy Start Key is pressed
E203While the scanner motor drive signal is being generated, clock pulses are not generated within 2 sec
E204The scanner leading edge signal (SCDP1) is not generated within 0.8 sec after the scanner has started to move
E209The scanner C.F.F. position signal (SCFFP) is not generated within 10 sec after the C.F.F. has been sent
E210The lens X home position signal (SCFFP) is not generated within 10 sec after the C.F.F. has been sent
E212The lens Y home position signal (LYHP) is not generated within 9 sec after the power switch or the Copy Start Key is turned ON. The lens Y home position signal (LYHP) is generated for 2 sec or more
E213In stream reading mode, the scanner original leading edge sensor 2 signal (SCDP2) is not generated for 5 pages continuously
E214While the scanner cooling fan (FM1, FM10, FM11) is rotating, an error signal is generated for 2 sec or more
E270In stream reading mode, the scanner leading edge signal(SCDP2) is not generated within a specific period of time after a command has been issued to lock the scanner
E710At power-on the IPC (Q170) on the DC controller PCB cannot be initialized
E711After power-on the IPC (Q170) on the DC controller PCB goes out of order
E712The communication IC on the RDF controller PCB has gone out of order
E713The communication IC on the sorter control PCB has gone out of order
E715The communication IC on the C.F.F. controller PCB has gone out of order
E717The communication IC on the Copy Data Controller-A1 PCB has gone out of order
E800An open circuit is detected
E801Current flows from the activation circuit in the absence of the scanning lamp ON signal
E802The relay (RL3) in the power supply unit does not operate in spite of the auto power-off signal


Canon 6150
Код ошибкиОписание
E000Thermistor
E001SSR
E002Thermistor, ht. Lamp thermal fuse or SSR
E003Thermistor, ht. Lamp thermal fuse or SSR
E005Fuser cleaning belt
E010Main drive problem
E020Toner motor, toner level sensor, toner hopper sensor
E030Counter
E050Duplex problem
E203Scan home problem
E210Lens home sensor
E401Document feeder paper pickup motor
E402Document feeder belt clock pulse problem
E403Document feeder main motor clock pulse problem
E411Document feeder sensor problem
E500Sorter/copier interface problem
E510Sorter motor drive
E530Sorter home sensor
E531Stapler swing sensor
E540Sorter lead cam home sensor
E541Sorter lead cam home sensor
E710DC controller board
E711DC controller board
E712Document feeder problem

Canon 6212
Код ошибкиОписание
CNo problem. Means that the machine is correcting the fuser film tracking.
CCDrum must be changed. Could be the drum serial number is identified by the logic as being non-compatible to that particular copier.
E000Low fuser temperature
E001High fuser temperature
E002High fuser temperature
E003Erratic fuser temperature
E007Fuser film off track and will not repair itself
E010Main drive problem
E030Counter problem
E064Scan problem, or power supply
E202Scan problem
E210Lens drive problem or lens sensor
E220Exposure lamp stays on or off
E240DC controller (main board) or composite power supply
E261Zero cross problem. Power frequency or composite power supply
E400Communication problem between boards
E80324 volt problem
EOFuser problem
HFuser overheat

Canon 6230
Код ошибкиОписание
E000Fuser did not heat up. Lamp, thermal switch, thermistors, connections, AC driver, DC controller, SSR, etc
E001Fuser temperature too high. Same possibilities as E000, as well as shorted wire
E002Fuser temperature not rising at correct pace. Same possibilities as E000
E003Fuser temperature drops. Same as E003
E004Fuser problem. AC driver, SSR bad, wire shorted
E010Drive problem. Main motor, gears, etc
E030Total counter
E064Composite power board or DC controller
E065Composite power board or DC controller
E202Scan motor or scan sensor problem. Panel locked with no Код ошибки. Scan motor problem
E203Scan problem or scan sensor
E204Scan problem or scan sensor
E210Lens sensor or motor problem
E212Lens sensor or motor problem
E220Exposure lamp or exposure lamp regulator board
E224Blanking shutter motor or sensor
E240DC controller or composite power supply problem
E244DC controller
E400RDF to copier communication problem
E401RDF Pickup motor or pick up sensor
E403RDF feed motor or pulse sensor
E404RDF delivery motion problem
E404RDF delivery motor problem
E411RDF tray sensor or registration sensor
E500Sorter main board or communication with copier
E510Sorter feed motor
E530Sorter guide bar motor
E531Sorter stapler motor
E540Sorter bin shift motor
E541Sorter bin motor
E550Sorter power supply
E710DC controller
E711DC controller
E712Document feeder IC failure
E716DC controller. Sorter
E800Auto power off function (DC controller)
E901Pedistal motor
E902Jogger side plate sensor or motor

Canon 6650
Код ошибкиОписание
E000Thermistor
E001SSR
E002Thermistor, ht. Lamp thermal fuse or SSR
E003Thermistor, ht. Lamp thermal fuse or SSR
E005Fuser cleaning belt
E010Main drive problem
E020Toner motor, toner level sensor, toner hopper sensor
E030Counter
E050Duplex problem
E203Scan home problem
E210Lens home sensor
E401Document feeder paper pickup motor
E402Document feeder belt clock pulse problem
E403Document feeder main motor clock pulse problem
E411Document feeder sensor problem
E500Sorter/copier interface problem
E500An error is identified in the communication between the sorter and the copier
E510The clock signal from the motor is absent for 250ms or more
E510Sorter motor drive
E513The clock signal from the motor is absent for 250 ms or more
E530Sorter home sensor
E530The home position sensor (P17) fails to go OFF when an equivalent of 2560 pulses of the motor drive command has been generated
E531The stapler unit swing sensor (MS9) fails to go ON within 500 ms after the motor drive command has been generated. MS9 fails to go back OFF within 1000 ms after it has gone on
E531Stapler swing sensor
E540The lead cam home position sensor (P12) fails to go OFF within 2000 ms after the motor drive command has been generated. P12 fails to go back ON within 2000 ms after it has gone OFF
E540Sorter lead cam home sensor
E541Sorter lead cam home sensor
E710DC controller board
E711DC controller board
E712Document feeder problem

Canon 7050
Код ошибкиОписание
E000Heater (Reset by unplugging machine)
E001Heater triac, DC controller, AC driver (reset by unplugging)
E005Fuser cleaner belt at end. Replace
E010Main motor, DC controller or DC driver board
E011Any motor ( main, scan, cleaner belt, duplex, toner, lens) DC driver, DC controller, duplex driver board
E020Toner out signal has been sent for at least 3 minutes
E050Duplex
E203Scan motor, DC driver, DC controller
E210Lens home sensor not actuated or won't deactuate
E240Controller board
E241Controller board
E242Controller board
E400DC controller, Doc. Feeder board, 24V power supply
E500DC controller, sorter board, 24V power supply

Canon 720, 740, 770, 790
Код ошибкиОписание
CNo problem. Means that the machine is correcting the fuser film tracking
CCDrum must be changed. Could be the drum serial number is identified by the logic as being non-compatible to that particular copier
E000Low fuser temperature
E001High fuser temperature
E002High fuser temperature
E003Erratic fuser temperature
E007Fuser film off track and will not repair itself
E010Main drive problem
E030Counter problem
E064Scan problem, or power supply
E202Scan problem
E210Lens drive problem or lens sensor
E220Exposure lamp stays on or off
E240DC controller (main board) or composite power supply
E261Zero cross problem. Power frequency or composite power supply
E400Communication problem between boards
E80324 volt problem
E0Fuser problem
HFuser overheat

Canon 7550
Код ошибкиОписание
E000Heater (Reset by unplugging machine)
E001Heater triac, DC controller, AC driver (reset by unplugging)
E005Fuser cleaner belt at end. Replace
E010Main motor, DC controller or DC driver board
E011Any motor ( main, scan, cleaner belt, duplex, toner, lens) DC driver, DC controller, duplex driver board
E020Toner out signal has been sent for at least 3 minutes
E050Duplex
E203Scan motor, DC driver, DC controller
E210Lens home sensor not actuated or won't deactuate
E240Controller board
E241Controller board
E242Controller board
E400DC controller, Doc. Feeder board, 24V power supply
E500DC controller, sorter board, 24V power supply

Canon 8070, 8570
Код ошибкиОписание
E000Fuser problem. Temperature too low. Heat lamp, thermal fuse or thermoswitch, thermistor, triac etc
E001Fuser problem. Temperature too high. Probably triac
E005Fuser web finished
E005Fuser cleaner belt user up
E010Drive
E010Main drive problem
E011Drive problem. Could be main motor, scan motor, cleaning web motor or duplex motor
E020Toner empty sensor sees no toner added for 3 min probably toner feed problem
E050Duplex problem
E203Scan motor
E210Lens home sensor or lens won't leave home
E240DC controller board
E241DC controller board
E242DC controller board
E243Operation panel board
E400DC controller, ADF board or 24V
E500DC controller, sorter board or 24V
E510Finisher; feed motor, pulse sensor, finisher board
E520Finisher; stack motor, stack tray sensor, finisher board
E530Finisher; guide plate motor, stapler guide, finisher board
E531Finisher; staple motor, staple sensor, finisher board

Canon 8530, 8580
Код ошибкиОписание
E000The surface temperature of the fixing assembly upper roller fails to rise by a specified value within 90 sec after power-on. The surface temperature of the fixing assembly upper roller fails to reach 150C within 8 min after power on. The surface temperature of the fixing assembly upper roller fails to reach 180C within 5 min after it has reached 150C. The surface temperature of the fixing assembly upper roller falls below 50C in standby
E001The surface temperature of the fixing assembly upper roller exceeds 250C
E005The cleaning belt inside the fixing assembly has been taken up more than a specified length
E010After generation of the main motor drive signal, two or more pulses are not received within 2 sec
E020The accumulative time during which the toner supply signal (TSP) has been generated by the developing assembly reaches 3 min
E050The holding tray home position signal (THP) is not generated within 4 sec while the holding tray motor drive signal (TMDP1,2) is being generated. The holding tray home position signal (THP) is generated 1 sec or more while the holding tray motor drive signal (TMDP1.2) is being generated
E13The error detection circuit on the waste toner feed motor driver PCB has detected on overcurrent
E203Input of two or more clock pulses is not received within 2 sec from the scanner motor drive signal is generated
E210The lens home position signal (LHP) is not generated within 4.8 sec after the power switch or door switch has gone ON. The lens home position signal (LHP) is generate 2 sec or more
E240An error has occurred in the microprocessor on the DC controller PCB
E243An error has occurred in the communication between the microprocessor of the DC controller PCB and the microprocessor in the control panel
E710An error has occurred in the communication between the DC controller PCB and the controller PCB of the option, and the DC controller has detected the error

Canon 9800
Код ошибкиОписание
E000The surface temperature of the fixing assembly upper roller fails to rise by a specified value within 90 sec after power-on. The surface temperature of the fixing assembly upper roller fails to reach 150C within 8 min after power-on
E001The surface temperature of the fixing assembly upper roller exceeds 250C
E005The cleaning belt inside the fixing assembly has been taken up more than a specified length
E010After generation of the main motor drive signal, two or more pulses are not received within 2 sec
E013The error detection circuit on the waste toner feed motor driver PCB has detected an overcurrent
E020The accumulative time during which the toner supply signal (TSP) has been generated by the developing assembly reaches 3 min*
E050The holding tray home position signal (THP) is not generated within 4 sec while the holding tray motor drive signal (TMDP1, 2) is being generated. The holding tray home position signal (THP) is generated 1 sec or more while the holding tray motor drive signal (TMDP1, 2) is being generated
E203Input of two or more clock pulses is not received within 2 sec from the scanner motor drive signal is generated
E210The lens home position signal (LHP) is not generated within 4.8 sec after power switch or door switch has gone ON. The lens home position signal (LHP) is generate 2 sec or more
E240An error has occurred in the microprocessor on the DC controller PCB
E243An error has occurred in the microprocessor of the DC controller PCB and the microprocessor in the control panel
E710An error has occurred in the communication between the DC controller PCB and the controller PCB of the option, and the DC controller has detected the error
E712No communication is perceived from the RF controller PCB for 200 ms or more the communication is monitored at all times

Canon A-1
Код ошибкиОписание
E500An error is identified in the communication between the sorter and copier
E510The clock signal from the motor is absent for 250 ms or more
E513The clock signal from the motor is absent for 250 ms or more
E530The home position sensor (P17) fails to go OFF when an equivalent of 2560 pulses of the motor drive command has been generated
E531The stapler unit swing sensor (MS9) fails to go ON within 500 ms after the motor drive command has been generated. MS9 fails to go back OFF within 1000 ms after it has gone ON
E540The lead cam home position sensor (P12) fails to go OFF within 2000 ms after the motor drive command has been generated. P12 fails to go back ON within 2000 ms after it has gone OFF

Canon C-120
Код ошибкиОписание
CNo problem. Means that the machine is correcting the fuser film tracking
CCDrum must be changed. Could be the drum serial number is identified by the logic as being non-compatible to that particular copier
E000Low fuser temperature
E001High fuser temperature
E002High fuser temperature
E003Erratic fuser temperature
E007Fuser film off track and will not repair itself
E010Main drive problem
E030Counter problem
E064Scan problem, or power supply
E202Scan problem
E210Lens drive problem or lens sensor
E220Exposure lamp stays on or off
E240DC controller (main board) or composite power supply
E261Zero cross problem. Power frequency or composite power supply
E400Communication problem between boards
E80324 volt problem
E0Fuser problem
HFuser overheat

Canon C-160
Код ошибкиОписание
E000Fuser thermistor, heater, thermal fuse
E001Fuser thermistor, or triac
E002Fuser thermistor, thermal fuse or triac
E003Fuser thermistor, heater, thermal fuse or triac
E004Triac or fuser won't shut off
E007Fuser film is off center or not driving properly
E010Main motor drive problem
E030Counter
E064Composite power supply or main board
E202Scan problem
E210Lens drive problem
E220Exposure lamp
E240Main board or composite power supply
E261Composite power supply or fluctuating power
E400ADF communication problem to machine
E402ADF belt motor drive
E404ADF exit motor
E411ADF document detect, or registration sensor or edge sensor
E500Sorter communication problem
E510Sorter drive problem
E530Stapler guide bar motor
E531Stapler swing motor
E540Bin shift motor
E541Bin motor drive problem
E710Main board
E711Main board
E712Main board or communication problem with ADF
E717Main board, asst. board
U0Initializing. Sets all user modes to factory default settings
U1Auto clear timer. Range 1-9. Each digit=1 minute
U2Automatic power shut off timer
U3Fine adjustment of zoom
U4Auto cassette switching
U5Sort or non-sort default
U6Cleans document feeder pickup assembly
U7CLEAR "replace drum"
U9Auto exposure or manual exposure as default

Canon C-180
Код ошибкиОписание
E000Fuser problem. Low temperature. Lamp, thermal switch, AC driver
E001Fuser problem. High temperature. Triac, AC driver, pinched wire
E004Fuser problem
E0053Sorter
E030Counter
E202Scan
E210Lens
E221Exposure lamp regulator board, thermal fuse, exposure lamp
E400Automatic document feeder
E500Sorter
E710DC controller

Canon C200D
Код ошибкиОписание
E000Fuser thermistor, heater thermal fuse
E001Fuser thermistor, or triac
E002Fuser thermistor, thermal fuse or triac
E003Fuser thermistor, heater, thermal fuse or triac
E004Triac or fuser won't shut off
E007Fuser film is off center or not driving properly. Might be able to reset in service mode 4-407
E010Main motor drive problem
E030Counter
E041Paper deck motor, clutch or sensor
E064Composite power supply or main motor board
E202Scan problem. Motor sensor
E210Lens drive problem
E220Exposure lamp
E240Main board or composite power supply
E260Main board, power supply cooling fan or composite power supply
E261Composite power supply or fluctuating power
E400ADF communication to machine
E401ADF pickup motor or sensor
E402ADF belt motor drive
E403ADF feed motor or slip sensor
E404ADF exit motor
E411ADF document detect, or registration sensor or edge sensor
E500Sorter communication problem
E510Sorter drive problem
E530Stapler guide bar motor
E531Stapler swing motor
E540Bin shift motor
E541Bin motor drive problem
E710Main board (DC controller.)
E711Main board (DC controller.)
E712Main board or communication problem with ADF, or ADF main board
E717Main board, assist board. "Replace drum": Drum waste toner is full, or drum has run 40,000 copies. Reset with user
E802Composite power supply or DC controller
E901Cassette feed unit board or cassette feed motor
E902Horizontal registration problem. I think this refers to the duplex section
J1Feed jam
J10Duplex exit jam
J11Vertical jam
J12Vertical jam
J13Vertical jam
J14Vertical jam
J15Deck jam
J2Feed jam
J3Separation area jam
J4Separation area jam
J5Exit jam
J6Exit jam
J7Sorter jam
J8Door open jam
J9Cassette jam
JACassette jam
JbCassette jam
JCCassette jam
JdDuplex feed jam
JEDuplex exit jam
JFDuplex registration jam

Canon NP
Код ошибкиОписание
E000Fuser thermistor, heater thermal fuse
E001Fuser thermistor, or triac
E002Fuser thermistor, thermal fuse or triac
E003Fuser thermistor, heater, thermal fuse or triac
E004Triac or fuser won't shut off
E007Fuser film is off center or not driving properly. Might be able to reset in service mode 4-407
E010Main motor drive problem
E030Counter
E041Paper deck motor, clutch or sensor
E064Composite power supply or main motor board
E202Scan problem. Motor sensor
E210Lens drive problem
E220Exposure lamp
E240Main board or composite power supply
E260Main board, power supply cooling fan or composite power supply
E261Composite power supply or fluctuating power
E400ADF communication to machine
E401ADF pickup motor or sensor
E402ADF belt motor drive
E403ADF feed motor or slip sensor
E404ADF exit motor
E411ADF document detect, or registration sensor or edge sensor
E500Sorter communication problem
E510Sorter drive problem
E530Stapler guide bar motor
E531Stapler swing motor
E540Bin shift motor
E541Bin motor drive problem
E710Main board (DC controller.)
E711Main board (DC controller.)
E712Main board or communication problem with ADF, or ADF main board
E717Main board, assist board. "Replace drum": Drum waste toner is full, or drum has run 40,000 copies. Reset with user
E802Composite power supply or DC controller
E901Cassette feed unit board or cassette feed motor
E902Horizontal registration problem. I think this refers to the duplex section
J1Feed jam
J10Duplex exit jam
J11Vertical jam
J12Vertical jam
J13Vertical jam
J14Vertical jam
J15Deck jam
J2Feed jam
J3Separation area jam
J4Separation area jam
J5Exit jam
J6Exit jam
J7Sorter jam
J8Door open jam
J9Cassette jam
JACassette jam
JbCassette jam
JCCassette jam
JdDuplex feed jam
JEDuplex exit jam
JFDuplex registration jam

Canon PC
Код ошибкиОписание
CNo problem. Means that the machine is correcting the fuser film tracking
CCDrum must be changed. Could be the drum serial number is identified by the logic as being non-compatible to that particular copier
E000Low fuser temperature
E001High fuser temperature
E002High fuser temperature
E003Erratic fuser temperature
E007Fuser film off track and will not repair itself
E010Main drive problem
E030Counter problem
E064Scan problem, or power supply
E202Scan problem
E210Lens drive problem or lens sensor
E220Exposure lamp stays on or off
E240DC controller (main board) or composite power supply
E261Zero cross problem. Power frequency or composite power supply
E400Communication problem between boards
E80324 volt problem
EOFuser problem
HFuser overheat
E000Fuser thermistor, heater, thermal fuse
E001Fuser thermistor, or triac
E002Fuser thermistor, thermal fuse or triac
E003Fuser thermistor, heater, thermal fuse or triac
E004Triac or fuser won't shut off
E007Fuser film is off center or not driving properly
E010Main motor drive problem
E030Counter
E064Composite power supply or main board
E202Scan problem
E210Lens drive problem
E220Exposure lamp
E240Main board or composite power supply
E261Composite power supply or fluctuating power
E400ADF communication problem to machine
E402ADF belt motor drive
E404ADF exit motor
E411ADF document detect, or registration sensor or edge sensor
E500Sorter communication problem
E510Sorter drive problem
E530Stapler guide bar motor
E531Stapler swing motor
E540Bin shift motor
E541Bin motor drive problem
E710Main board
E711Main board
E712Main board or communication problem with ADF
E717Main board, asst. board
U0Initializing. Sets all user modes to factory default settings
U1Auto clear timer. Range 1-9. Each digit=1 minute
U2Automatic power shut off timer
U3Fine adjustment of zoom
U4Auto cassette switching
U5Sort or non-sort default
U6Cleans document feeder pickup assembly
U7CLEAR "replace drum"
U9Auto exposure or manual exposure as default
EOHeater problem
E1The heater film has gone off center. Turn machine off & on, make sure it's level etc
E2Scan problme
E6Exposure lamp or exposure lamp sensor
E000Fuser problem
E001Fuser problem
E010Drive
E210Zoom/lens/motor problem
E00Heater, thermoswitch, exit sensor (Reset by jumping CP102 pins 1 & 2, or leave machine off for 20 seconds
E001Shorted thermistor or high-temperature, Exit sensor
E010Clock Pulse
E210Zoom Lens Problem

Canon PC6
Код ошибкиОписание
E000Fuser problem
E001Fuser problem
E010Drive
E210Zoom/lens/motor problem

Canon PC7
Код ошибкиОписание
E00Heater, thermoswitch, exit sensor (Reset by jumping CP102 pins 1 & 2, or leave machine off for 20 seconds
E001Shorted thermistor or high-temperature, Exit sensor
E010Clock Pulse
E210Zoom Lens Problem

Canon NP7161
Код ошибкиОписание
E000
  • The thermistor (TH1, TH2) has poor contact or an open circuit
  • The fixing heater (H1) has an open circuit
  • The thermal switch (TSW1) has turned on
  • The triac is faulty
  • The DC controller PCB is faulty
    • E001
  • The thermistor (TH1, TH2) has a short circuit
  • The triac is faulty
  • The DC controller PCB is faulty
    • E002
    E003    		The thermistor (TH1, TH2) has poor contact or an open circuit
  • The fixing heater (H1) has an open circuit
  • The thermal switch (TSW1) has turned on
  • The triac is faulty
  • The DC controller PCB is faulty
    • E004
  • The triac has a short circuit
  • The DC controller PCB is faulty
    • E010
  • The main motor (M1) is faulty
  • The DC controller PCB is faulty
    • E013
  • The waste toner feedscrew is locked
  • The waste toner feedscrew lock sensor (PS8) is faulty
  • The DC controller PCB is faulty
    • E030
  • The total copy counter has an open circuit
  • The DC controller PCB is faulty
    • E031
  • The accessories counter has an open circuit
  • The DC controller PCB is faulty
    • (E202)No code indication. Keys are disabled
  • The scanner home position sensor (PS1) is faulty
  • The scanner motor (M2) is faulty
  • The DC controller PCB is faulty
    • E208
  • The mirror home position sensor (PS3) is faulty
  • The mirror motor (M4) is faulty
  • The DC controller PCB is faulty
    • E210
  • The lens home position sensor (PS2) is faulty
  • The lens motor (M3) is faulty
  • The DC controller PCB is faulty
    • E220
  • The lamp regulator PCB is faulty
  • The DC controller PCB is faulty
    • E261
  • The power supply frequency is faulty
  • The power supply PCB is faulty
    • E710
    E711
  • The DC controller PCB is faulty
    • E712
  • The DC controller PCB is faulty
  • The ADF controller PCB is fault
  • The ADF cable is faulty
    • E717
  • The DC controller PCB is faulty
  • The Remote Diagnostic Device II PCB is faulty
    • E800
  • The auto power-off circuit has an open circuit
  • The DC controller PCB is faulty
    • E805
  • The exhaust fan (FM2, FM4) is faulty
  • The DC controller PCB is faulty
    • E821
  • The ozone filter is clogged
  • The cleaner thermistor (TH3) has poor contact or an open circuit
  • The DC controller PCB is faulty
    • Posted by at

    No comments:

    Post a Comment

    Subscribe to: Post Comments (Atom)